🚚 FREE US SHIPPING ON ORDERS $65+

Product Features:

The Python is an upgrade kit for the Bambu Lab AMS, adding the following features to the original AMS:

• Active Filament Drying - The Python can be equipped with 4 PolyDryers to dry filaments while using the AMS
• More Control and Power - Double Helical spool gears with a high torque 11:1 gear ratio - No more overloading error.
• Expanded Compatibility - Fit up to 79mm wide spool; Up to 205mm spool diameter
• Ergonomic Improvement - Upgraded PTFE loading system for easier and faster loading.

Our Python Bambu Lab AMS Upgrade Kit includes EVERYTHING (TPU GEARS INCLUDED) you need to build the Python AMS upgrade with an optional Enclosure Kit. The Enclosure allows for PolyDryer attachments to actively dry filaments during AMS operation. For more information, please watch the video below.

The fully 3D Printed kit (made with Black VOXELPETG+ HS) is the latest 1.0.4 version. All printed pieces are ready for assembly right out of the box. No additional pieces are required! VOXEL Python AMS Dryer Upgrade is RFID-compatible. 

ModBot's Python AMS Upgrade Review Video:

The Python Kit includes (Everything needed for the Python AMS):

• All Python 3D Printed Pieces (Optional) - Self Threaded (Screw directly into the parts)
• 8 - 608-ZZ bearings
• 4 - 693-ZZ bearings
• 22 - M3 x 8mm Screws
• 4 - M3 x 10mm Screws
• 5 - M3 x 12mm Screws
• 22 - M3 x 16mm Screws
• 29 - M3 x 25mm Screws (Screws for 4 Spool Holders Included)
• 2 Meters Bambu Lab PTFE Tube
• 4 - Small TPU Gears
• 3 - Python Silica Dry Boxes (Optional - attach to the Python for passive filament drying)

• Detailed Instructions

• No extra tools are required (you can use the hex key that came with your Bambu Lab 3D Printer)

The Python Enclosure Kit includes (Everything needed for the Python Enclosure):

• All Enclosure 3D Printed Pieces (Optional) - Self Threaded (Screw directly into the parts)
• 6 - All Required Acrylic Panels
• 8 - 6 x 3 Magnets
• 46 - M3 Heated Inserts
• 6 - M3 x 8mm Screws
• 28 - M3 x 10mm Screws
• 16 - M3 x 12mm Screws
• 8 - M3 - 16mm Screws
• 8 - M3 - 25mm Screws
• 25 Feet Double Sided Tape
• 3 - Python Silica Dry Boxes (Optional - attach to the Python for passive filament drying)
• PolyDryers and AMS are NOT INCLUDED

• Detailed Instructions

• No soldering required - Screw directly into the parts

VOXELPLA+ and VOXELPETG+ are compatible with the STOCK AMS without any modification required

Our Python AMS Upgrade is MADE IN THE USA

We have partnered with Hume Beam, the designer of Vision Enclosure, the Hydra Pro, and the Python for the Bambu Lab 3D Printer, to offer this set. This would not have been possible without his and the community's dedication to the project.